LANCER
زيزوومى متألق
غير متصل
المشكلة واضحة من العنوان
كل ما اعمل تحديث للويندز
ينفتح صفحة ميروسوفت
و يعمل تشل للويندز بعدين يطلع الخطا التالي
مع العيلم ان الويندز اصلية
لانها اتت مع لاب توب
مع العيلم ان التحديث كان شغال 100%
ومدري ويش صارلة
كل ما اعمل تحديث للويندز
ينفتح صفحة ميروسوفت
و يعمل تشل للويندز بعدين يطلع الخطا التالي
مع العيلم ان الويندز اصلية
لانها اتت مع لاب توب
مع العيلم ان التحديث كان شغال 100%
ومدري ويش صارلة
[Error number: 0x8DDD0018]
The site cannot continue because one or more of these Windows services is not running:
- Automatic Updates (allows the site to find, download and install high-priority updates for your computer)
- Background Intelligent Transfer Service (BITS) (helps updates download more quickly and without problems if the download process is interrupted)
- Event Log (keeps a record of updating activities to help with troubleshooting, if needed)
To make sure these services are running:
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, double-click on Automatic Updates and then click Properties.
4. In the Startup type list, select Automatic and click Apply.
5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.
6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply.
8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
9. In the list of services, double-click on Event Log and then click Properties.
10. In the Startup type list, select Automatic and click Apply.
11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
1. Click Start, and then click Run.
2. Type services.msc and then click OK.
3. In the list of services, double-click on Automatic Updates and then click Properties.
4. In the Startup type list, select Automatic and click Apply.
5. Verify that the Service status is started, if the Service Status is Stopped click on the Start Button.
6. In the list of services, double-click on Background Intelligent Transfer Service (BITS) and then click Properties.
7. In the Startup type list, select Manual and click Apply.
8. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
9. In the list of services, double-click on Event Log and then click Properties.
10. In the Startup type list, select Automatic and click Apply.
11. Verify that the Service status is started, If the Service Status is Stopped click on the Start Button.
If this does not resolve the problem you may request help from one of the following resources.
For self-help options:
- يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
- يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
- يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
For assisted support options:
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي(no-cost for Windows Update issues)
