قم بمتابعة الفيديو أدناه لمعرفة كيفية تثبيت موقعنا كتطبيق ويب على الشاشة الرئيسية.
ملاحظة: قد لا تكون هذه الميزة متاحة في بعض المتصفحات.
تصميم إيهــاب مصطفى
تصميم إيهــاب مصطفى
تصميم Ramy Badraan
تصميم Ramy Badraan
تصميم Ramy Badraan
فرمت جهاز واحفظ ملفاتك في فلاش
حمل هذا البرنامج
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
بعدها اغلق جميع البرامج وخصوصا الانترنت اكسبلورر والماسنجر
شغل البرنامج ==> واضغط على
Do a system scan and save log
لحظات .. ويظهر لك تقرير داخل المفكرة==> انسخه والصقه بردك القادم
اخي العزيز dr.roman
ماهي المشكله بالاساس التي تواجهه جهازك والتي
تريد حلها
راح اشوفكم اليوم رحت نزلت اداة mats_run.dvd من موقع مايكروسوفت ومن اجيت اثبت الاداة شاهدو شو طلع عدي
![]()
ونزلت اداة fixitcenter_run. ونفس المشكلة تطلعلي رسالة خطة
![]()
وجربت حملتهن من غيير مواقع هم تواجهني نفس المشكلة
ان شاء الله تنحل المشكلة على اديكم
here's how i solved the problem:
Download the exe installer for windows installer 3.1 v2 from here
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي(يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي)
you can try running it, but most probably will get an "access denied" error and it will roll back the changes. If it installs fine, then you are set and don't need to do anything more, if not, look below.
Make sure automatic updates are turned off, or set them to "notify me but don't automatically download or install them."
also make sure winxp's cd isn't in your cd/dvd drive.
Check in the services app (services.msc) that windows installer service isn't running, stop it if needed.
Open the x:\windows\system32\dllcache\ folder (where x: Is your system drive) and delete these three files (if they exist):
Msi.dll
msihnd.dll
msiexec.exe
after that, from this symantec article
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي(يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي)
do this:
On the windows desktop, click start > run.
In the open line, type cmd and then click ok.
At the command prompt, type the following, depending on your version of windows, and then press enter after each line.
Cd \windows\system32
ren msi.dll msi.old
ren msihnd.dll msihnd.old
ren msiexec.exe msiexec.old
exit
(notice that after each rename you will get a prompt from windows that system files have been replaced, and it asks for the winxp cd in order to restore them. Do not put the winxp cd into the drive, click cancel, then choose yes in the other dialog box that appears.)
restart the computer.
Run the windows installer 3.1 exe installer (downloaded in the beginning).
Follow the prompts to complete the installation, it will install fine.
Restart the computer.
You might get dialog boxes with errors about msi.dll missing.
I got such a dialog box from my anti-virus software.
Start the command prompt (cmd) again, and rename the three files back.
Go to windows update. It will say it needs to install windows installer 3.1, and will say the installation failed, but it will actually succeed.
Do not restart the computer, click the link to windows update home on the left to go back to the main windows update screen with the "express" & "custom" buttons.
Click the express button, it should show you all post-sp2 updates (around 40-50 mbs). They should download quickly (if you are not on dial-up).
After the updates install, restart your computer.
You can now change the auto updates setting to the one you like.
To check if windows installer has been properly updated, follow this link
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
طيب اخوي جرب الاداة fixitcenter_run
من هذا الرابط هل تعمل
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
هلا اخوي
اولاً: هل منزل عندك Microsoft .NET Frammework
ثانياً:- حمل هذا
وخبرني بالنتائج
هنـا
أتضح عندك مشكله ان أي شي تبي تثبته او تشغله يطلع لك خطأ
حاول تدخل الى الوضع الآمن
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
وعمل التقارير تاليه
تقريريجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
ووهذا ايضا ً
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي