اخى الكريم اهلا بك
صوره الايدى هى نفسها قبل وبعد التنصيب
كما قال لك الاخ نور
فقط قم بتعطيل كارت النت او الصوت او اى كارت
للحصول على ايدى جديد
فى انتظارك
قم بتعطيل اى كارت من الجهاز
Here is the some example of getting different Installation ID`s Using Same Product Key.
1. Disable or Enable Network Adapters
2. Disable Sound Card Driver
3. Disable OR Uninstall IDE ATA/ATAPI controllers
4. Disable or Enable Network Adapters and Sound Card Driver together
5. Disable or Enable Network Adapters and Disable& Uninstall IDE ATA/ATAPI controllers together
6. Disable Sound Card Driver and Disable & Uninstall IDE ATA/ATAPI controllers together.
بالصور
Getting Second Installation ID with same Product Key:
2.1. Right click Windows start button select Run or WIN + R
2.2. Type devmgmt.msc
2.3. When you come to the Device Manager Disable Network Adapters
2.4. Go back to Command Prompt With Admin
Type this script and hit Enter
slmgr.vbs -ipk <WindowsProductKey>
2.5. Type slui 4 in the command prompt then click NEXT.
After this you will get different Installation ID with same Product Key then you can carry on dialling Microsoft Call Center to get Confirmation ID
2.6. After activation you can re enable Network Adapters back again
========================================================================================
Getting Third Installation ID with same Product Key:
3.1. This time we are going to Disable Sound Card Driver on Device Manager to order to get third Installation ID
3.2. Once Again:
slmgr.vbs -ipk <WindowsProductKey>
3.3. Type slui 4 in the command prompt then click NEXT.
3.4. Finally you can call MS again try your luck Third time.
Note: I only test Network Adapter & Sound Card you may even find more Device to disable to get some more installation ID..... : )
3.5. Re enable Sound Card Driver back again.
========================================================================================
Getting Fourth Installation ID with same Product Key:
Disable& Uninstall IDE ATA/ATAPI controllers and getting another Installation ID
There is one more way getting different installation ID using same Microsoft Product Key.
1. Go to Control Panel\Hardware and Sound\ Device Manager >>>> Click IDE ATA/ATAPI controllers
2a. Right click the device driver if you see Disable Option click
2b. If there is no Disable Option available then Uninstall Option [No Panic after activation DONE you can re install again]
3. After Disable / Uninstall Driver get another ID and finalize the activation...
4. After successfully activate you can unable the driver if you uninstall then go to the Action Tub then Click Scan for hardware changes you will see driver will re install again after scan done.