AabedKhalifa
خبير شروحات برامج، (خبراء زيزووم)
★★ نجم المنتدى ★★
فريق الدعم لقسم الحماية
نجم الشهر
كبار الشخصيات
- إنضم
- 7 يناير 2008
- المشاركات
- 4,935
- مستوى التفاعل
- 17,477
- النقاط
- 7,500
- الإقامة
- K.S.A
- الموقع الالكتروني
- quran.ksu.edu.sa
غير متصل
أعضاء وزوار
منتدانا زيزووم الحبيب
اقدم لكم البرنامج الاحترافى المنافس للنسخ الاحتياطى لاى نظام ولاى هارد او بارتشن
فى ثوانى و مضغوط لاقصى حد
نسخة من قلب الموقع المطور وهى نسخة احترافية و قوية و يمكن الاعتماد عليه ان شاء الله
R-Tools R-Drive Image 6.3 Build 6309 Portable
و نسخة منشطة محمولة للعمل مباشرة ان شاء الله
موقع الشركة
فى ثوانى و مضغوط لاقصى حد
نسخة من قلب الموقع المطور وهى نسخة احترافية و قوية و يمكن الاعتماد عليه ان شاء الله
R-Tools R-Drive Image 6.3 Build 6309 Portable
و نسخة منشطة محمولة للعمل مباشرة ان شاء الله
موقع الشركة
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
أقدم لكم برنامج :
R-Tools R-Drive Image 6.3 Build 6309
برنامج لعمل نسخة احتياطية من نظامك وملفاتك وبرامجك لاستعادتها عند حلول اي خلل او تلف في النظام..لمن يجد دائماً مشاكل في جهازه ويعمل فورمات باستمرار إليك هذا الحل .. برنامج R-Drive Image يعمل باك اب من القرص الذي تحدده سواء C او D: او اي محرك اقراص او حتى جميع الاقراص ويمكنك ان تحتفظ بالنسخة على هارديسك خارجي او على سيدي روم او على قرص DVD وتستخدمها في اي وقت تريد او يمكنك حتى وضعها على اي قرص من اقراصك الثابتة واستعادتها مع اي طارىء قد يحدث لملفاتك فبعد عمل النسخة يمكنك عند حدوث اي مشكلة استعادة النسخة وجعل جهازك كانك عملت له فورمات .. فعلاً هذا البرنامج ذو قدرات رائعة ..وسهل الاستخدام و ذو واجهة بسيطة و يمكنك من عمل ملف أيزو اقلاعى يمكنه البووت من البيوس او النظام الجديد اليوافى
R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc. R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive's free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.
Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.
R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.
Features:
• A simple wizard interface - no in-depth computer management skills are required.
• On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
• Image files compression. Image files can be compressed to save free storage space.
• Removable media support. Image files can be stored on removable media.
• Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn't supported.
• USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
• Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
• Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended. VIEW THE LIST
• An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
• Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
• Image files splitting. Drive images can be split into several files to fit a storage medium.
• Image Protection. Disk image files can be password-protected and contain comments.
• New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
• Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
• Disk to Disk copy. An entire disk can be directly copied on another one.
• Image files verification. You may check if your image files are good before you store them or restore data from them.
• Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
• Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
• Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
• Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
• Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.
التوافق مع الانظمة
تثبيت النسخة
فقط شغل النسخة المحمولة للعمل مباشرة كمسئول بكافة الامكانيات
مزايا النسخة
واجهه البرنامج سهلة الاستخدام حيث تحتوى على الادوات اللازمة لعمل عملية النسخ الاحتياطى منها :
R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc.
R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive's free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.
Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.
R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.
الاصدار و التنشيط :
Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.
R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.
Features:
• A simple wizard interface - no in-depth computer management skills are required.
• On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
• Image files compression. Image files can be compressed to save free storage space.
• Removable media support. Image files can be stored on removable media.
• Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn't supported.
• USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
• Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
• Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended. VIEW THE LIST
• An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
• Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
• Image files splitting. Drive images can be split into several files to fit a storage medium.
• Image Protection. Disk image files can be password-protected and contain comments.
• New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
• Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
• Disk to Disk copy. An entire disk can be directly copied on another one.
• Image files verification. You may check if your image files are good before you store them or restore data from them.
• Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
• Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
• Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
• Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
• Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.
التوافق مع الانظمة
تثبيت النسخة
فقط شغل النسخة المحمولة للعمل مباشرة كمسئول بكافة الامكانيات
مزايا النسخة
واجهه البرنامج سهلة الاستخدام حيث تحتوى على الادوات اللازمة لعمل عملية النسخ الاحتياطى منها :
R-Drive Image is a potent utility providing disk image files creation for backup or duplication purposes. A disk image file contains the exact, byte-by-byte copy of a hard drive, partition or logical disk and can be created with various compression levels on the fly without stopping Windows OS and therefore without interrupting your business. These drive image files can then be stored in a variety of places, including various removable media such as CD-R(W)/DVD, Iomega Zip or Jazz disks, etc.
R-Drive Image restores the images on the original disks, on any other partitions or even on a hard drive's free space on the fly. To restore system and other locked partitions R-Drive Image is switched to the pseudo-graphic mode directly from Windows or bootable version created by the utility is launched from CD disc or diskettes.
Using R-Drive Image, you can completely and rapidly restore your system after heavy data loss caused by an operating system crash, virus attack or hardware failure. You can also use R-Drive Image for mass system deployment when you need to setup many identical computers. In other words, you can manually setup one system only, create an image of the system, and then deploy it on all other computers, saving your time and costs. If you need to restore only certain files from a disk image, you can connect that image as a virtual disk and copy those files directly from the disk image using Windows Explorer or any other file utility.
R-Drive Image is one of the best backup and disaster recovery solutions to prevent losing your data after a fatal system failure.
- A simple wizard interface - no in-depth computer management skills are required.
- On-the-fly actions: Image files are created on-the-fly, no need to stop and restart Windows. All other disk writes are stored in a cache until the image is created. Data from image files are restored on-the-fly as well, except on a system partition. Data to the system partition can be restored either by restarting R-Drive Image in its pseudo-graphic mode directly from Windows, or by using specially created startup disks.
- Image files compression. Image files can be compressed to save free storage space.
- Removable media support. Image files can be stored on removable media.
- Startup version. A startup version can be used to image / restore / copy partitions locked by the OS. The computer can be re-started into the startup version either directly from Windows, or from an external USB device, a CD/DVD disk, or 6 floppies. The startup version can use either a graphic user interface, or a pseudo-graphic mode, if the graphic card isn't supported. Support for UEFI boot for modern computers.
- USB 2.0 and 3.0 support in the startup version. With hard drives prices constantly going down, an external IDE-USB 2.0 or 3.0 HDD case with an appropriate hard drive is an ideal (fast and reliable) solution for storing backup files for system and other partitions that can be restored only in the startup version. Do not use numerous unreliable CD discs and slow CD/DVD recorders any more. Remember: with the incremental backup, this hard drive is not to be too large.
- Network support in the startup version. R-Drive Image startup version supports disk image file creation and restoration over the Microsoft network (CIFS protocol).
- Extended List of the supported devices in the startup version. The list of hardware supported by R-Drive Image startup versions has been extended.
يجب عليك تسجيل الدخول او تسجيل لمشاهدة الرابط المخفي
- An image file can be connected as a read-only virtual disk. Such disk can be browsed through and files/folders can be found and copied.
- Individual files and folders restoration. Individual files and floders rather than entire disk can be restored either during the restoring action or from a image file connected as a virtual disk.
- Image files splitting. Drive images can be split into several files to fit a storage medium.
- Image Protection. Disk image files can be password-protected and contain comments.
- New partition creation. Data from a disk image can be restored on a free (unpartitioned) space on any place on a hard drive. The size of the restored partition can be changed.
- Partition replacement. Data from a disk image can be restored on other existing partitions. R-Drive Image deletes such partitions and restores data on that free space.
- Disk to Disk copy. An entire disk can be directly copied on another one.
- Image files verification. You may check if your image files are good before you store them or restore data from them.
- Scheduler. A time for disk image creation may be scheduled and the process can be run in unattended mode.
- Script creation for frequent or unattended actions. Such scripts for creating an image file and appending data to an existing image file are created from the R-Drive Image interface the same way the actual action is performed. Scripts are executed from a command line and such command can be included to any command file.
- Action Report. When disk image is successfully created or the action fails the report can be automatically sent over e-mail or an external application can be launched.
- Support for the ReFS file system (Resilient File System), a new local file system Microsoft has introduced in its Windows 2012 Server. All disk actions are supported, except partition resizing.
- Full support for the GPT partitioning layout. R-Drive Image can create GPT disks, resize them, and change their partition layout during copy/restore operations.
- Support for Windows dynamic disks (software RAIDs) and Storage Spaces (Windows 8/8.1/10/Threshold 2/Anniversary/all Creators update), Linux mdadm RAIDs and Logical Volume Manager volumes, and Apple CoreStorage/File Vault/Fusion Drive Volumes and RAIDs.
الاصدار و التنشيط :
النسخة بالموضوع أحدث اصدارمن قلب الشركة بنسخة محمولة
R-Tools R-Drive Image 6.3 Build 6309 Multilingual
[hide]
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
[/hide]اسطوانة البووت للبرنامج للعمل من البوت:
[hide]
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
[/hide]الاسطوانة عبارة عن ملف ايزو بحجم 55 ميجا
يتم نسخها على اسطوانة فارغة او فلاشة مناسبة
وتدعم الاقلاع من البيوس و اليوفى للاجهزة الحديثة
أدعو الله عز وجل التوفيق للجميع
وأن ينفعكم الموضوع على الوجه الاكمل
التعديل الأخير بواسطة المشرف:
