ebn_om_abd
زيزوومى مبدع
غير متصل
من فضلك قم بتحديث الصفحة لمشاهدة المحتوى المخفي
قم بمتابعة الفيديو أدناه لمعرفة كيفية تثبيت موقعنا كتطبيق ويب على الشاشة الرئيسية.
ملاحظة: قد لا تكون هذه الميزة متاحة في بعض المتصفحات.
[ يمنع ] طرح أي موضوع يحوي على كراكات أو باتشات او كيجنات من غير فحصها عبر موقع فيروس توتال [ virustotal.com ] وطرح رابط الفحص ضِمن الموضوع.
الله يجزاك خير ،،
فى انتظار كل اليفيد وخصوصا الفيرس اكس ،،
شوفوا سرعة الرد يا ناااااس ،
الموضوع >>>>اليوم, 07:33 pm
اول رد >>>>اليوم, 07:37 pm
الله يحميكم يا زيزووومييييين ـ،،
لاني مركب محرك أفيرا اليوم :hh:
Hi,
First of all, this adapter rule "Deny all packets from IP" is only available when the firewall is set to high (if the firewall is set to medium or low, then this rule isn't present anymore).
Secondly, please note that "Deny all packets from IP" is the fourth rule in the Incoming Rules section. This means that it will only be applied if an IP packet doesn't correspond in any of the first 3 rules.
The first 3 rules allows all the TCP and ICMP traffic. Also, almost all the UDP traffic is allowed (all the traffic sent from the client's PC is permitted, but some IP packets that returns on some different ports then the ones specified in the default configuration of the firewall, are blocked by the "Deny all packets from IP" rule.
Hi,
Right click on the system tray umbrella and choose "Configure AntiVir". Be sure to tick "Expert mode" -> go to Firewall -> select "Local Area Connection (Active)" -> click on the "Add rule" button -> select "Allow File and Printer Sharing" template and click ok.
Right click on the system tray umbrella and choose "Configure AntiVir". Be sure to tick "Expert mode" -> go to Firewall -> select "Local Area Connection (Active)" -> click on the "Add rule" button -> select "Allow IP" template and click ok, enter the desired IP and click ok.